Research

A builders lodge for the Prince's castle

Bee hall at the Liermolen

Winnowing barn at the Liermolen

Calculating the number of bricks The number of bricks depends on the used format. By means of a table Here we give a table with the number of bricks and amount of mortar per m² measured for a half brick wall (1 stone wall = x2) in half stone bond, this is masonry that exclusively consists of stretchers, and with a joint width of 10 mm. Included is a chopping/breaking loss of brick of 3% and a prefab-mortar loss of 3%. With a traditional mortar you can count on 10% of mortar loss. (Data from Royal Assembly of Dutch Brick Factories and from Jozef Dockx)

Building a half-timbered workshop experiment

Calculating the amount of mortar This calculation depends on the measurements of the chosen brick. Estimate the necessary number of litres/m² of mortar by means of this table. Calculate the surface (see calculating the number of bricks) and multiply this by the number of litres/m² to get the volume of mortar. For a bastard mortar with approx. 1 m³ of sand and a proportion 1 : 1 : 6 you will need the following: Portland cement (CEM I and class 42,5): approx. 200 kg Chaffed lime: approx. 100 kg Rhine sand 0/2: approx. 1600 kg of 1m³ For lime mortar with approx. 1 m³ of sand and a proportion 2 : 1 : 1 you will need the following: sandy clay: approx. 3200 kg Rhine sand 0/2: approx. 1600 kg of 1 m³ chaffed lime: approx. 600 kg Example (by means of building plan): number of litres mortar/m² ½ brick wall for Module 50 = 32 litres or 50 kg number of litres mortar/ m² 1 brick wall for Module 50= 64 litres or 100 kg total surface ½ brick thick = 2,576 m² total surface 1 brick thick= 5,422 m² total...