Research

The board cutter (1) is a hand tool for cutting softboard plates. The shape is reminiscent of a plane, but it is not one. In most models, a guide is provided in the center, in which a blade can be attached at an angle. A hollow space is provided for this purpose. The whole is fastened with lateral screws. Board was a popular building material in the 1950s and 1960s and consists of sheets of pressed fibres, used, among other things, as ceiling panels. With a board cutter one could cut plates to size and cut a bevel to obtain a V-shape between two connected plates. [MOT] (1) The proper name in English is yet unknown.

Raw meat is boned with a boning knife. It has a sturdy, narrow blade (approx. 10-20 cm long) with a wide back and a sharp point. It is attached in a wooden or plastic handle that is usually shaped in such a way that the hand - which becomes greasy during boning - cannot slip on the blade. See also the ham boner. [MOT]

This text can only be consulted in Dutch <https://www.mot.be/resource/Tool/bolter-for-kitchen?lang=nl>

This text can only be consulted in Dutch <https://www.mot.be/resource/Tool/block-plane?lang=nl>

This text can only be consulted in Dutch <https://www.mot.be/resource/Tool/boathook?lang=nl>

This blowing tube to stir up the fire in a fireplace is not to be confused with the blow pipe (glass blower) or the blow pipe (silversmith).

The blow pipe of a glass blower is not to be confused with the blowing tube for a fireplace or the blow pipe (silversmith).

This text about the bottle-brush can only be consulted in Dutch.

The boot jack is a wooden or metal (now also plastic) tool for easy removal of boots. Usually it consists of a fork-shaped branch or plank (approx. 25-30 cm by 10 cm). Underneath there is a cross wood or a metal support so that the fork or the notch is about 5 cm above the ground. The whole can also be made of metal. The back of the one boot is inserted into the fork-shaped end and the other foot is placed on the board. Another model consists of a plank into which an opening in the shape of a foot has been cut (1). There is also a foldable model where the shelf is hinged in the middle so that it can be taken with you on a journey more easily. The boot jack can be combined with a brush or a boot hook. [MOT] (1) ARMINJON & BLONDEL: 336 write that this model can be provided with a hinged long handle that can be grasped as a support.

This text can only be consulted in Dutch <https://www.mot.be/resource/Tool/bottleopener?lang=nl>