Research

Search our website

Search our website by entering a keyword or choose a database above to search specifically.

Search


Showing search results  8,401 - 8,410 14,445 results found
Coal shovel
Shovel with broad blade and sloping edges, fitted with a wooden D-handle. The coal shovel is used by the coal merchant for shoveling coal. See also the charging shovel. [MOT]
Cold Chisel
This text can only be consulted in Dutch <https://www.mot.be/resource/Tool/cold-chisel?lang=nl>
Closer's welt plough
This text can only be consulted in Dutch <https://www.mot.be/resource/Tool/closers-welt-plough?lang=nl>
Coffee mill
Roasted coffee beans can be finely ground with a coffee mill. It has grooved, cast iron grinding discs, which are set in motion by means of a rotating crank. The grinding mechanism of most coffee mills can be adjusted from coarse to fine with an adjusting screw. The coffee mill can have a square wooden housing with a rotating crank at the top and a drawer at the bottom where the ground coffee ends up (approx. 10-15 cm wide; approx. 20-26 cm high). The housing can also be cylindrical (approx. 8-10 cm in diameter; approx. 10-20 cm high) and made of metal. Another model is made of cast iron (approx. 12-27 cm wide; approx. 30-45 cm high) and is screwed to the edge of the table or counter. At the top there is a funnel where the coffee beans are placed; under the grinder there is a receptacle or a spout. In the latter case, a separate container must be placed underneath. The crank is located alongside. There is also a wall model. The painter uses a similar tool to grind pigments. [MOT]
Club hammer
Heavy metal hammer (up to 15 kg) with long handle (up to approx. 80 cm) suitable for various purposes. This tool is used by many craftsmen, the quarry worker uses it to drive wedges into the rock. It can be distinguished from the mash hammer which is lighter and has a shorter handle. [MOT]
Closer's hammer
Full metal shoemaker's tool (min. 13 cm long) with a swollen, cylindrical center piece; one end is circular, the other wedge-shaped. The middle part acts as a handle. The rapping hammer is used to smooth seams, by tapping one end and rubbing with the other, and to smooth wrinkles on the last. See also the seam rubber. [MOT]
Combination pliers
This text can only be consulted in Dutch <https://www.mot.be/resource/Tool/combination-pliers?lang=nl>
Cookie cutter
This text can only be consulted in Dutch <https://www.mot.be/resource/Tool/cookie-cutter?lang=nl>
Compass race
This text can only be consulted in Dutch <https://www.mot.be/resource/Tool/compass-race?lang=nl>
Cone spanner
This text can only be consulted in Dutch <https://www.mot.be/resource/Tool/cone-spanner?lang=nl>