Research

This text can only be consulted in Dutch <https://www.mot.be/resource/Tool/shrimp-decorticator?lang=nl>

This text can only be consulted in Dutch <https://www.mot.be/resource/Tool/sideways-rebate-plane?lang=nl>

This text can only be consulted in Dutch <https://www.mot.be/resource/Tool/shoulder-stick?lang=nl>

The slater's stake is a tool for cutting slates to size. It has a sharp straight edge at the top and a sharp point at the bottom that can be hammered into the roof boarding. The slate is placed on the sharp top and cut off with the roofer's hammer. There are different models: round, triangular, rectangular, straight, curved. The straight models are made entirely of metal and have no handle, while the triangular models have a wooden handle. [MOT]

The slate ripper is used to pull out the nails that hold the slates to a roof. It is a metal sheet of approx. 30-50 by 4-5 cm with lateral backward notches, one end of which is bent perpendicularly. A metal handle is forged at that end that ends in a hook. The slater pushes the sheet under the broken slate, grabs the nail into a notch and pulls the tool towards him; sometimes he hits the right-angled part with his hammer. [MOT]

Hand tool with a wide rectangular blade (6 to 10 cm) with a very sharp, straight cut and a firm handle. With the skiver, the leather is processed before it is cut to size. The leather worker places the blade almost horizontally on the leather when planing and pushes the skiver forward. In this way, it scrapes away unevenness on the surface of the leather and the leather becomes evenly smooth and shiny. To prevent the skiving knife from slipping, the part of the leather to be processed is dusted with flour. In this way, the edge of the tool grips well on the leather. The skiver is stored in a sturdy leather or cardboard cover.The tool can be distinguished from the lace cutting knife. [MOT]

The sledgehammer is a heavy hammer (between 2 and 12 kg) with wedge-shaped peen, which in some cases lies in the same plane as the handle. The handle is long (approx. 60 to 100 cm) so that it can be gripped with both hands to hit with great force. The sledgehammer is used by the blacksmith for heavy forging work; many other professions use it too, such as the quarry worker. When the blacksmith works with one or more helpers, he uses a forging hammer to indicate where to strike. The helpers then each handle a sledgehammer to do the actual forging work. [MOT]

Use a skimming scoop to wipe off the excess foam from a tapped pint. It is a flat, elongated (approx. 20-25 cm), light (approx. 50 gr), full metal plate with a narrower handle. The skimming scoop is used to stroke the edge of the glass in order to obtain a smooth, level foam layer. [MOT]

This text can only be consulted in Dutch <https://www.mot.be/resource/Tool/slate-splitting-chisel?lang=nl>

This text can only be consulted in Dutch <https://www.mot.be/resource/Tool/snail-plate?lang=nl>