Research

This text can only be consulted in Dutch <https://www.mot.be/resource/Tool/knife-sharpener?lang=nl>

The jointer plane is a plane up to one meter long with a turning chisel, a handle and sometimes a horn. It serves to plan perfectly smooth long pieces already worked with the jack plane. Sometimes one or two cross poles are attached on or in the block in order to be able to work in pairs: one craftsman pushes, another pulls. Sometimes a rope is tied to the front crossbar. Because this plane has to do fine work, the angle of the chisel is quite large and the space for the cut is small. The latter is completely straight, only the corners are rounded so as not to leave any traces. [MOT]

More technical information on our dutch pages. See also these safety fuse pliers. [MOT]

With this knife, the tile maker cuts off the excess clay around the tile mould.The hand tool consists of a thin rectangular trapezoidal iron blade with a cylindrical wooden handle at the top of the short side. The cut is always longer than the mould.This knife is not used for cutting, but is pushed diagonally forward and down along the side of the tile mould. [EMABB]

This text can only be consulted in Dutch <https://www.mot.be/resource/Tool/knife-board?lang=nl>

Wooden, rectangular hammer with short handle, usually made of beech or vinegar. Sometimes the head may be slightly bowed. The carpenter uses this hammer for various hammering or chiselling work, to close mortise and tenon joints, etc.See also the joiner's hammer. [MOT]

This text can only be consulted in Dutch <https://www.mot.be/resource/Tool/key-for-soil-auger?lang=nl>

This text can only be consulted in Dutch <https://www.mot.be/resource/Tool/key-for-cream-seperator?lang=nl>

This text can only be consulted in Dutch <https://www.mot.be/resource/Tool/ice-axe?lang=nl>

This text can only be consulted in Dutch <https://www.mot.be/resource/Tool/lard-kettle?lang=nl>