Research

This text can only be consulted in Dutch <https://www.mot.be/resource/Tool/hand-vice?lang=nl>

Wooden lever (1.5 to 2 meters long) clad with metal fittings at the bottom, to lift heavy loads to a small height. Railroad workers use them to separate railroad tracks. Quarry workers such as the stonecutter use a handspike to place stone blocks on rollers. This tool can be distinguished from the crow bar and the ripping chisel. [MOT]

This text can only be consulted in Dutch <https://www.mot.be/resource/Tool/handsaw?lang=nl>

Cellular, foam or aerated concrete is a concrete product with gas bubbles in it, making the material light, strong and easy to work with with the aerated concrete handsaw and with the stonemason's French drag. The aerated concrete handsaw has a thick (approx. 1.5 mm) tapered blade (approx. 50-70 cm). The large carbide (widia) teeth (30-40) are angled forward, so they saw when pushing the tool. See also the handsaw. [MOT]

Hand tool used by the farmer to move bales of straw. It is a hook-shaped iron with a ring as a handle. Distinguishable from the cotton hook which is lighter and usually shorter. [MOT]

This text can only be consulted in Dutch <https://www.mot.be/resource/Tool/handcarder?lang=nl>

This text can only be consulted in Dutch <https://www.mot.be/resource/Tool/hardie?lang=nl>

The hay fork is a fork with 2 to 3 - sometimes four - round or square, pointed, slightly curved, iron or steel tines (approx. 15-30 cm; spacing: approx. 7-20 cm), which have a straight wooden handle of varying length (approx. 100-300 cm). Sometimes it is also a monoxil fork-shaped branch (1). The farmer prefers a steel hay fork with two tines, to put the sheaves on the cart at harvest time or to stick it from the cart in the attic. The one with three teeth or the wooden bundle fork is often used to turn the hay (see also the hay rake). There is also a double model with a row of 3 tines at the bottom and a row of 2 tines at the top to collect the hay into bales. [MOT] (1) Eg. ROBERT: 8-20.

In crops growing in rows, the roots of weeds are cut with the hand wheel hoe; they are sometimes also used to break the crust so that a better air circulation is created and to counteract the capillary effect - and thus the drying out. The hand wheel hoe usually consists of two metal wheels (diam. Approx. 35 cm), each with a rod on the axle that keeps a metal plate, just behind the wheel, at the correct height. Both trapezoidal plates, connected by a bracket, are provided with 2-3 slots into which the oblique knives or hoes can be screwed to the desired width. The whole is pushed in front of you by means of two wooden arms (approx. 130 cm). There are also hand wheel hoes with one wheel with which you can hoe between two rows of plants, as opposed to the model with two wheels, which works on both sides of one row of plants. Nowadays there is a model with a rubber wheel (approx. Diam. 25-60 cm) where the hoes can be replaced by the blade of a hand ridger or hand cultivator (1). [MOT] (1)...

Axe-shaped tool with one, usually two axe-shaped, straight cutting edges that are in the same plane as the handle (approx. 40-60 cm), for working natural stone. The cutting edge has an angle between 10 ° - for working soft stone types - and 40 ° for hard stone types. The stonemason uses this dressing axe mainly to remove the excess material from soft stones. It is also used to flatten natural stone after it has been roughly worked with the stone-dressing pick or the pointed chisel, as well as in finishing to give the stone a ribbed appearance (see also charring chisel). [MOT]